Engineering the
back baffle.

Behind the face bars, a sealed sleeve holds six opposed blades driven by a self-locking key drive. The AIRLŪM key passes between the face bars into the key drive access socket, set deep in the sleeve just ahead of the baffle, so air still flows through that gap. The drive turns the blades. Air pressure on the blades can't turn it back.

60% open · 3.6 turns
  1. 1Flanged face frame
  2. 2Fixed face bars (7)
  3. 3Baffle sleeve
  4. 4Opposed blades (6)
  5. 5Pivot pins in nylon bushings
  6. 6Linkage bar and crank arms
  7. 7Self-locking Key Drive
  8. 8Key Drive Access Socket
  9. 9Spring mounting clips
  10. 10Perimeter foam gasket

Drive path

AIRLŪM key→Key drive access socket→Self-locking key drive→Linkage bar→All six blades

Why it holds its setting

The key drive is self-locking: it moves only when the AIRLŪM key turns it. Duct pressure, fan start-up and vibration push on the blades, and the drive holds them in place. Only the key changes the setting.

Why opposed blades

Neighboring blades rotate in opposite directions, so air leaves straight through the face bars instead of being pushed to one side. Opposed blades also give finer, more even control at partial settings than a single-blade damper.

Why it stays quiet

Blade pins run in nylon bushings that need no lubrication and don't click. The sleeve is sealed to the flange with a foam gasket, so air goes through the blades rather than whistling around the edges.